Connecting The Power Cord - Saba V3293DL Operating Instructions Manual

To change source: Press the centre of the button for
the list of sources to appear on the screen. Browse
through stored channels by pressing the Up or Down
button.
To turn off the television : Press and hold down the
centre of the Down button for a few seconds until the
television enters Standby mode.
Putting batteries in the remote control
Lift the cover at the back of the remote control.
Insert two AAAsize batteries. Make sure that the +
and – ends of the batteries match the in the battery
compartment (respect the right polarity). Put the cover
back in place.

Connecting the power cord

IMPORTANT: This television is designed to operate
solely with a 220-240V ~ 50 Hz. power supply. After
taking the television out of its package, wait a bit for the
TV to reach ambient temperature before connecting it
to the electricity plug. Connect the power cord to the
main plug.
Connecting the antenna/Cable
Connect the antenna or the SDSq antenna cable to
the ANTENNA INPUT (ANT) found at the back of
the TV set.
Notification
Manufactured under licence from Dolby Laboratories
MANUFACTURED UNDER LICENCE
"Dolby" and the double D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and the high definition
multimedia interface are marks or registered
trademarks of HDMI Licensing LLC.
Information applicable to users in relation to
disposal of old devices and batteries
[European Union only]
This symbol indicates that the equipment should not
be disposed of as household waste. If you have to
discard the TV set or the batteries, consider using
collection systems or infrastructure for appropriate
recycling.
Note: The Pb sign inscribed on the batteries indicates
that the battery contains lead.
Technical details
TV Frequency (tuner)
Number of memorable
channels
Audio standard
On screen display
RF Input Socket
Operating voltage:
AUDIO OUTPUT
POWER (WRMS.) (10%
THD)
Power consumption
st-by power
consumption
Weight Stand
TV Dimensions DxLxH
(with foot)
TV Dimensions DxLxH
(without foot)
Operating temperature
and humidity
English - 64 -
Battery
Products
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
1000
German +Nicam Stereo
On Screen Display
75 Ohms (unbalanced)
220-240V ~, 50HZ
2 x 6 WRMS
65W (max)
0,5 W (max)
6,90 kg
185 x 747 x 495 mm
70 x 747 x 458 mm
5ºC up to 45ºC, 85%
humidity max