Topfield Digital Satellite Receiver TF 6000 PVR User Manual page 64

56 Listing Services
perform the Motorized DiSEqC 1.2 menu of the digital receiver.
Refer that menu to § 4.1.2. After making a new satellite entry
by pressing the OK button on the box, you should configure
LNB settings for it. Refer LNB settings to § 4.1.1.
To delete a satellite entry, choose your desired satellite entry at
the Satellite drop-down list box, and then select the Function
Satellite, TP Delete Satellite menu item. Then a box appears
asking for your confirmation, the selected satellite entry will
be deleted by pressing the Yes button on it.
To modify a satellite entry, choose your desired satellite entry
at the Satellite drop-down list box, and then select the Function
Satellite, TP
the same as in adding a new satellite entry.
To add a transponder entry, select the Function
TP Add Transponder menu item. Then a box appears, in
which you should specify frequency, symbol rate, polarity and
stream identification for your new transponder. Pressing the
OK button will save a new transponder entry.
To delete a tansponder entry, choose your desired transponder
entry at the TP List list box, and then select the Function
Satellite, TP Delete Transponder menu item. Then a box
appears asking for your confirmation, the selected transponder
entry will be deleted by pressing the Yes button on it.
To modify a transponder entry, choose your desired trans-
ponder entry at the TP List list box, and then select the Function
Satellite, TP
is the same as in adding a new transponder entry.
Edit Satellite menu item. How to modify is
Edit Transponder menu item. How to modify
Satellite,