Relic Ana-Digi T205 Quick Start Manual

ENGLISH
Ana-Digi T205, T206
(1 crown/3 pushers)

Analog Time Setting

1. Pull crown out to position 2.
2. Turn crown clockwise to the correct time.
3. Return crown to position 1.

Digital Time Setting

1. Press B to select time mode.
2. Press and hold A to enter setting mode, seconds will begin flashing.
3. Press C to advance digit.
4. Press A to set and advance to next setting value.
5. Setting sequence is seconds, minutes, hour, 12/24 hour format.
6. Press A to save and exit setting mode.

Date Setting

1. Press B to select date mode.
2. Press and hold A to enter setting mode, hour will begin flashing.
3. Press C to advance digit.
4. Press A to set and advance to next setting value.
5. Setting sequence is date, month, weekday.
6. Press A to save and exit setting mode.

Digital Alarm Setting

1. Press B to select alarm mode.
2. Press C to toggle alarm on/off.
3. Press and hold A to enter setting mode, hour will begin flashing.
4. Press C to advance hour.
5. Press A to set and advance to minute.
6. Press C to advance minutes.
7. Press A to save and exit setting mode.
NOTE: Chime must be on to hear alarm. To turn chime on, enter time mode, and press
A and C at the same time.

Chronograph Mode

1. Press B to select chronograph mode.
2. Press C to start/stop the chronograph.
3. Press A to reset to zero.

Split Time

1. For split time, press A while the chronograph is running.
2. Press A again to return to chronograph.
3. Press C to finalize timing.
4. Press A to reset to zero.
B
1 2
A
C
B
1 2
A C