Troubleshooting - Aardwolf RAINBOW EDITION User Manual

7. Troubleshooting

While preparing to install the fans, check the product for completeness.
Causes of fan failure:
1) The fan impeller does not rotate:
– check the impeller for foreign objects, perhaps it jammed;
– turn off the fan and remove foreign objects;
– check fan connection to controller;
– check the controller connection to the power supply;
– press the button (4) on the remote control several times.
If all of the above does not help, try plugging the fan into another free connector on
the controller.
2) Backlight does not work:
– check the connection of fans to the controller;
– press the button (1) on the remote control.
If all of the above does not help, try plugging the fan into another free connector on
the controller.
3) Remote control does not work:
– place the remote control and the controller as close as possible to each other and
check their operation by pressing the buttons.;
– replace the battery in the remote control.
If all of the above does not help, contact the service center.
8. General limitations and safety
Storage, transportation and disposal considerations
This device should be stored in the warehouse or home and optionally transported to
existing retail package. The place of storage (transportation) must be inaccessible to
moisture, direct sunlight and to exclude the possibility of mechanical damage. This product
is recommended to store at air temperature from + 5 ° С to + 40 ° С and humidity up to 75%.
Subject to the rules and conditions of storage, the warranty period for storage of the device
in the manufacturer's original packaging is 10 years.
Using device after expiration date
The calculated minimum service life of the device provided by the manufacturer for the fan is 10
years old and works only if using the product exclusively for their own needs, and if the consumer
observes the rules of operation, storage and transportation products. Provided careful handling
of the product and compliance with the rules of operation, the actual lifetime may exceed the
design life set by the manufacturer. At the end of the product's service life, it is advisable to
contact an authorized service center for preventive maintenance of the product and determine
its suitability for further operation. Work on preventive maintenance of the product and its
diagnostics are performed by authorized service centers for a fee.
8
English
WWW.SENJIN-CN.COM