Pairing A Bluetooth® Device; Recording Function - Sound Pro NDS-1010 Instruction Manual

PAIRING A BLUETOOTH® DEVICE
Use Bluetooth® mode to stream music from a Bluetooth® enabled player (e.g.,
smartphone or tablet device). A device must be paired with the unit before using them
together for the first time.
To pair a Bluetooth® enabled device with the Speaker, follow these steps:
1. Make sure Bluetooth® is enabled on your device and that it is next to the unit before
attempting to pair it.
2. Turn on the Speaker and set it to Bluetooth® mode (press the MODE Button). The
speaker will automatically enter pairing mode and make a beeping sound.
3. Use your device to search for nearby Bluetooth devices. The Speaker will be listed
as "SOUNDPRO NDS-1010". (This function is usually in the Bluetooth® settings menu;
refer to your device's instruction manual to learn more.)
4. Select "SOUNDPRO NDS-1010" from the list of found/available devices. The Speaker
will make a confirmation tone upon successful connection.
You can now start playback on your connected device to begin streaming music to the
speaker.

RECORDING FUNCTION

Use the included recording function to record audio onto USB and TF cards. To do so,
follow these steps:
1. Insert a USB flash drive into the USB port or a TF card into the TF card slot.
2. Insert the wired microphone into the microphone input. Check to ensure that the
microphone is working properly.
3. Press and hold the "REC/PLAY" button to begin recording audio.
4. Briefly press the "REC/PLAY" button to play the recording file.
5. Briefly press the "REC/PLAY" button again to exit recording when finished.
5