Advertisement
Installation
1. Follow installation instructions provided for LED light.
2. Wired controller features two channels for independent control of blue and white LED lights. Connect each channel of the
wired controller into the blue and white channels of your LED light.
3. Plug wired controller into DC power supply. Note: This controller is rated for 12 or 24VDC, 50 watts maximum.
Controller Functions
Dynamic Modes
The wired controller features 7 dynamic modes which can be cycled through by pressing the "mode" button
Mode 1 - Both white and blue lights on, intensities can be adjusted by pressing the white or blue button
Mode 2 - Moonlight - only blue light on, brightness can be adjusted by pressing the blue button
Mode 3 - Cloud Cover - blue and white lights gently fade in and out
Mode 4 - Cloud Cover 2 - a higher intensity cloud cover/fade
Mode 5 - Cloud Cover 3 - high intensity, slow rolling fade effect
Mode 6 - Storm 1 - A gentle rain storm with lightning effects
Mode 7 - Storm 2 - More powerful fade with dramatic lightning effects
Note: pressing the mode button for four seconds will turn the light on/off. When the light turns on, it will return to the previous
setting it was in.
Wired Controller
Blue Channel - Press button to control
brightness of Blue LEDs, hold button for 4
seconds to turn blue channel on/off
Mode Control - Press mode button to
switch LED light into dynamic modes (see
below), hold button for 4 seconds to turn
all LEDs on/off
White Channel - Press button to control
brightness of White LEDs, hold button for 4
seconds to turn white channel on/off
For additional programming details,
please visit www.current-usa.com
www.current-usa.com
Advertisement
