Advertisement
Quick Links
Note: Before installation, please ensure the mounting location of the LED strip is clean of any debris
and/or moisture. Do not place closer than 1" to any fluorescent, compact or metal halide lamp.
Quick installation process
• Position LED strip near mounting location. Peel back 3M adhesive backing and install strip into place by pressing firmly onto location.
Silicone clips and screws are provided for additional support.
• Connect the female DC plug on the remote to the male DC plug from the transformer/power supply.
• Plug the transformer into a GFCI protected AC outlet.
• Position the wired remote in an accessible location.
Using your new remote
Seven exciting modes to choose from.
1- Dusk
2- Lunar Light Blue
3- Dawn
4- Sunny Skies
Lumens
Fits Aquariums
Dimensions:
Voltage
Watts:
LEDs
Satellite Freshwater LED Flex
5- Cloud Cover
6- Storm Low
7-Storm High
Remote control modes & operation
• Press the button marked "Blue" to activate the blue lights. Press again to dim.
• Press the button marked "White" to activate the white lights. Press again to dim.
• Use the Mode button to select one of the 7 dynamic modes.
• Press and hold the Mode button for 3 seconds to turn all lights off.
• Press the Mode button again and it will resume to last Mode set.
800
18"-48"
44" x 0.375" x 0.125"
12V olts DC
13.2
48 6.500K White/24 445nm Blue
Advertisement
Summary of Contents for Current Satellite Freshwater LED Flex
- Page 1 Satellite Freshwater LED Flex Note: Before installation, please ensure the mounting location of the LED strip is clean of any debris and/or moisture. Do not place closer than 1” to any fluorescent, compact or metal halide lamp. Quick installation process •...
- Page 2 If you discover a defect, please see your retail store or point of information that you should read and save for future reference. purchase. Current USA, Inc. will, at it’s option, repair or replace Remember you can always quickly reference instructions for all the product at no charge to you, provided you return it during the our products at www.current-usa.com.
- Page 3 Mode 7 - Storm 2 - More powerful fade with dramatic lightning effects Note: pressing the mode button for four seconds will turn the light on/off. When the light turns on, it will return to the previous setting it was in. For additional programming details, please visit www.current-usa.com www.current-usa.com...