Welcome Thank you for purchasing Furrion Aurora™ Bluetooth Soundbar. Before operating your new product, please read these instructions carefully. This instruction manual contains information for safe use, installation,introduction of the product. The manufacturer does not accept responsibility for any damages due to not observing these instructions.
Contents Welcome .........................2 Contents .........................3 Safety Warnings ....................4 Before Operation ....................7 What’s in the box ................................7 Power Source ..................................7 Prepare your Remote Control .............................8 Function Overview ....................9 Front/Side/Back panel of the Soundbar ........................9 Remote Control .................................10 Connection ......................11 Installation ......................13 Operation .......................15 General Operation ................................15 Bluetooth Operation ................................15...
Safety Warnings Precaution 9. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as if objects have fallen into the CAUTION device, or the device does not operate normally, or has been dropped. RISK OF ELECTRIC SHOCK DO NOT OPEN 10.
Page 5
Safety Warnings chemicals, abrasives, or solvents when storage temperature is -33°C (-27.4 °F) cleaning any surface on the unit. to +58°C (+136.4°F). Protect the Soundbar from damage by the extreme 17. Any severe physical impact on the temperature. This is not a commercial product may cause certain components outdoor Soundbar.
Page 6
2 hours and can lead to FURRION hereby declares that this death. If you think batteries might have equipment is in compliance with the essential been swallowed or placed inside any...
Before Operation What’s in the box Unpack the box carefully and check if the following parts are included. If any parts are missed or damaged, please contact the authorized retailer where you purchased immediately. ● Soundbar x 1 ● Remote control x 1 & Button battery x 1 ●...
Before Operation Prepare your Remote Control BATTERY INSTALLATION ● Use a tool similar as a coin to rotate the battery cover counterclockwise until it is completely removed. ● Insert the button battery (Type: CR2025) with polarity + upside to the battery compartment. ●...
Function Overview Front/Side/Back panel of the Soundbar Front Back COAX AUX L- RCA -R Side Display Panel COAX in Display the current mode or status. Connect to the Coaxial output on your TV or other AV devices. Source Input/ Mode Display RCA (L-R) in Connect to the audio out on your TV or...
Press and hold it for 3 seconds to unpair the connected device, then launch paring with a new device. * BT Name: Furrion SB 2.0 or Furrion SB 2.1 Select an input source for the Soundbar: AUX / RCA / COAX / BT.
Connection Before connecting, open the protective cover on the back of the Soundbar by removing the screws. Warning: Disconnect power supply before you make or change any connections. 1. Connecting to your TV COAX AUX COAX AUX L- RCA -R L- RCA -R L (White) R (Red)
Page 12
Connection COAX AUX L- RCA -R Bluetooth Bluetooth MY DEVICES Furrion SB 2.0 Connected Cable Management After the connections are completed, close the protective cover and tighten the screws for the best waterproof effect.
We recommend you to contact a professional for installation. − During the installation make sure the unit is powered off and unplugged. Otherwise, it may cause an electric shock. Option 1. Fix the Soundbar on the compatible Furrion Aurora™ TV (TV Model: FDUF43CBR/ FDUF49CBR/ FDUF55CBR/ FDUF65CBR/FDUP43CBR/ FDUP49CBR/ FDUP55CBR/ FDUP65CBR) 1.
Page 14
Installation Option 2. Mount the Soundbar to wall separately Caution : Before mounting on wall, make sure the wall can support the weight of this unit. Purchase and use the fixing screws and anchors appropriate for the type of wall (plaster board, iron board, wood, etc.) you have.
After BT mode is selected, it will launch pairing mode automatically. Activate the Bluetooth function on the mobile device and find the Soundbar BT name Furrion SB 2.0 or Furrion SB 2.1 from the device list to connect. Unpair Press and hold on the remote control for 3s to unpair the Bluetooth.
Ensure that you select the right BT Name Furrion SB 2.0/ Furrion SB 2.1 on your device. If BT Name Furrion SB 2.0/ Furrion SB 2.1 is not present on the list, Fail to connect a disconnect the Bluetooth on the device and launch pairing again to Bluetooth device.
Stereo RCA Input (x 1) Input terminals 3.5mm Aux Input (x 1) Coax Input (x 1): Support and comply with PCM format. Frequency response 40Hz-18KHz S/N ratio 65dB (Audio 1KHz 0dB) Bluetooth Version V4.2 (A2DP/AVRCP) BT Name Furrion SB 2.0 Furrion SB 2.1...
Need help?
Do you have a question about the Aurora FSBNN3MR-BL and is the answer not in the manual?
Questions and answers