Limitless™ WDRR Series
1.5.2 Tri-color Output LEDs:
RF Link switch position "0"
Output LED status
LED off
Solid green
Solid red
Solid yellow
Flashing yellow
RF Link switch position 1-9, A-E
Output LED status
LED off
Flashing green
Flashing red
Solid yellow
Flashing yellow
RF Link switch position F
Sequence each LED color
1.5.3 Low Battery output LED
RF Llink switch position 0-9, A-E
Low battery LED status
Solid green
Solid red
RF Signal switch position F
Sequence each LED color
1.5.4 Lost RF Link output LED
RF Link switch position 0-9, A-E
Lost RF Signal LED status
Solid green
Solid red
RF Link switch position F
Sequence each LED color
Condition
No device paired to output
Output off (set-up mode allows indication to be reversed)
Output on (set-up mode allows indication to be reversed)
Lost RF link
Low battery
Condition (RF Signal switch position 1-9, A-E)
No device paired to output
Output off & RF signal strength LEDs
Output on & RF signal strength LEDs
Lost RF link
Low battery
LED test mode
Condition
Acceptable voltage(s)
Low voltage(s)
LED test mode
Condition
Acceptable RF link(s)
Lost RF link(s)
LED test mode
Issue 2,
indicated for chosen output
indicated for chosen output
Honeywell Sensing and Control
50063986
7