XPLORER 871
2. USING THE ADSL MODEM
2.1 THE TOP LEDS
LED
1
SYS
2
ADSL RXD
3
ADSL TXD
4
ADSL SYN
5
LAN LNK
6
LAN ACT
7
PWR
2.2 THE REAR PORTS
Power (jack)
USB (USB connector)
LAN (RJ-45 connector)
LINE (RJ-11 connector)
Meaning
Flashes when the router is working properly.
Flashes when receiving data.
Flashes when transmitting data.
Lit green when ADSL physical layer is connected.
Lit green when the LAN link is up.
Flashes when there is activity on the LAN port.
Lit green when power adapter is connected.
Power
Connect the supplied power adapter to this jack.
Connect the supplied USB cable to this port when connecting to the PC.
Connect the supplied crossover cable to this port when connecting to a NIC
(Network Interface card) in PC. Connect an UTP Ethernet cable to this port
when connecting to a LAN such as an office or home network.
Connect the supplied RJ-11 cable to this port when connecting to the ADSL.
1 2 3 4 5 6 7
USB
LAN
LINE
24
Need help?
Do you have a question about the Xplorer 871 and is the answer not in the manual?
Questions and answers