Page 3
Protection cover installation instructions: Base on figure to install protection cover, and use screw to fix it. Remote control installation instructions: Blade installaction location: bladeA bladeB Front back 25.400 25.400 ) ) ) figure 1 figure 2 figure 3 Power 1.
Flying operation introduction: Hover up and down Forward and backward Front Push the throttle up or down, the Push the elevator/aileron up or down, quadcopter flies upward or downward. the quadcopter flies forward or backward. Left side fly and right side fly Turn left and right Pull the throttle left or right, the Pull the elevator/aileron left or right,...
Page 5
Environment for flight: Please have good practice before go to flight. Battery charging using instruction: 1. Battery installation: 1. Clockwise rotate to open battery door. 2. Battery's plug insert to quadcopter's plug. 3. Put battery into battery socket,then make well line and plug. 4.
Reset opertaion introduction: 1.Transmitter reset: When transmitter cannot control quadcopter normally, pls turn off transmitter, then re-turn on transmitter, transmitter will reset automatically. 2.Quadcopter reset: When quadcopter cannot fly normally, also the transmitter already reset, at this time, you can try to reset the quadcopter.