Setup The Wireless Network; Wps; Setup The (E)Ssid - Topcom Skyr@cer WBR 7201 N Quick Installation Manual

Setup the Wireless Network

4 Setup the Wireless Network
4.1

WPS

The Skyr@cer WBR 7201n supports the Wi-Fi Protected Setup (WPS) feature.
The WPS can send the wireless encryption settings from the router automatically to the
WPS-enabled wireless client (for example Skyr@cer USB 4201n).
This means that you don't need to enter the encryption settings in your WPS-enabled
wireless adapter if you want to connect to your router. Just press the WPS key from the
router, then press the WPS key on the wireless adapter and the secured connection will
be established after a few seconds.
If you don't setup the router wireless encryption settings, the WPS will
automatically create a very sophisticated encryption key (WPA-PSK) for you.
If you want to use non-WPS Wireless client adapter it is recommended to setup
the wireless encryption manually.
For the automatic WPS setup you don't need to go through sections 4.2 and 4.3 below.
4.2

Setup the (E)SSID

J Click General Setup and go to Wireless > Basic Settings
1
10
>
- Wireless Settings page -
Choose the wireless Mode: Access Point (AP) is default.
>