Topcom Skyr@cer 544 Quick Installation Manual page 15

HL_Skyr@cerAP544.book Page 15 Wednesday, February 12, 2003 3:19 PM
MAC Filter function controls the MAC of the network devices that are listed in this table for access
authorization or denial. When MAC Filter is enabled, by selecting the " Enabled " radio box, select
one of two choices:
• Only deny PCs with MAC listed below to access device, or
• Only allow PCs with MAC listed below to access device
The maximum number of MAC addresses that can be stored in Access Pint is 50. You can browse
through the MAC address saved by selecting the drop-down box.
For any changes made in the security page, click " Apply " for the changes to be effective. When
the above page will appear. Click " Back " to go back to the previous page.
Skyr@cer Access Point 544
ENGLISH
15