Topcom Skyr@cer WBR 754SG Quick Installation Manual page 9

• Now you can change the LAN settings:
- Click Next to proceed
• Now the WBR754 will try to detect your broadband connection type
• Depending on your connection type next screen will appear: (for PPPoE, this screen will not appear if the auto
detection has been successful )
- Select your Connection Type
- Click Next to proceed
- Obtain IP automatilally (DHCP client): this connection is mostly used for connecting the WBR754 to a cable
modem.
- Fixed IP address: for connections with fixed WAN IP address.
- enter the WAN IP, Subnet Mask, Gateway and DNS addresses.
- Click Next to proceed.
Topcom Skyr@cer WBR 754
- The LAN IP address and Subnet mask can be changed.
- The router DHCP server can be Disabled / Enabled
- The DHCP range can be set.
9