Sip Configuration - Topcom ATA 1110 User Manual

Step 2 : Configuration

2.3 SIP Configuration

Enter the VoIP - SIP Config setting page to setup the sip
information:
• Register Server Addr:enter the SIP provider server address
• Register Server Port:enter the SIP server register port
• Register Username:enter the username of your SIP account
• Register Password:enter the password of your SIP account
• Phone Number: enter phone number of your SIP account.
• Check Enable Register
• Check Enable Pub Outbound Proxy
Click Apply to confirm the settings.
Go to the Config Manage - Save Config page and
click "save" to save the configuration, otherwise you
will lose the setting after the ATA reboots.
4
(typical 5060)
(if there is no phone number available, just
enter the username).