Special Product Features - InVento 500094 Manual

Declaration of Conformity
Herewith Invento Products & Services GmbH declares that this model (Art.No. 500094 = 2019) including remote control meets the
basic requirements and any other relevant requirements of guideline 2014/53/EU. The original declaration of conformity can be
requested on www.inventodownload.com/conformity
Contents
1 x High Speed Racing Car 1 x remote controller 20 x pylon 1 x antenna 1 x roll bar 1 x USB charging cable 1 x operating instructions

Special Product Features

X X
Long runtime: 6-10 minutes (equipped with high-performance battery that achieves the best performance after repeated
charge and discharge).
X X Long operating range: 30-40 meters.
X X
Reliable frequency selection and high interference immunity.
Operating instructions
Please read the operating instructions carefully before using and keep it in a safe place.
Preparation
1. Use a Phillips screwdriver to open the battery compartment cover. Insert
6 x AA batteries with the correct polarity and replace the battery compart-
ment cover.
3. Stick both ends of the roll bar together. The second adhesive surface must face upwards in order to stick it to the bottom of
the vehicle.
Roll bar
Double adhesive
point on the bottom
of the vehicle
With the mounted roll bar the vehicle will get back to its wheels quickly after a rollover.
8+
Stick it to the bottom of the vehicle
5
2. Insert and tighten the antenna to the antenna
hole on the transmitter as illustrated.
Adhesive
surface must
face upwards
Vehicle with mounted roll bar