Advertisement
8. Orient the Handlebar (S) as shown.
Set the Handlebar (S) inside the Handlebar
Clamp (T). Adjust the Handlebar to the desired
position and then close the Handlebar Clamp.
9. Place the Handlebar Cover (U) over the
Handlebar Clamp (T). Then, tighten the
Handlebar Knob (V) with the Spacer (W) into
the Handlebar Clamp.
10. The Console (X) requires two AA batteries (not
included); alkaline batteries are recommended.
Remove the battery cover, insert the batteries
into the battery compartment, and reattach the
battery cover. Make sure to orient the batter-
ies as shown by the diagram inside the bat-
tery compartment. Do not combine old and
new batteries or alkaline and rechargeable
batteries.
All manuals and user guides at all-guides.com
8
8
T
S
9
U
V
W
T
10
Batteries
X
Advertisement
