Advertisement
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires only the included tool(s).
1. While a second person lifts the rear of the
Frame (B), attach the Rear Stabilizer (A) with
two M8 x 70mm Bolts (C), two M8 Curved
Washers (D), and two Domed Nuts (E).
2. Orient the Front Stabilizer (F) as shown.
While a second person lifts the front of the
Frame (B), attach the Front Stabilizer (F) with
two M8 x 60mm Bolts (G), two M8 Curved
Washers (not shown), and two Domed Nuts (not
shown).
All manuals and user guides at all-guides.com
5
1
A
D
E
C
2
D
B
B
F
G
Advertisement
