Installing The Pe Cable; Installing The Ac Output Power Cable - Huawei SUN2000L-5KTL Quick Manual

Installing the PE Cable

4.2
Do not connect the neutral wire to the enclosure as a PE cable. Otherwise, electric shocks will be
caused.
NOTE
 The PE point at the AC output port is used only as a PE equipotential point, and cannot
substitute for the PE point on the enclosure.
 Recommended: Apply silica gel or paint around a ground terminal after connecting the ground
cable.

Installing the AC Output Power Cable

4.3
Ensure that the protection layer of the AC output power cable is in the connector, and that the
exposed core wire is totally inserted into the cable hole and connected securely. Failing to do so
may cause SUN2000L malfunction or damage.
1. Connect the AC output power cable to the AC connector.
Three-Core Cable (L, N, and PE)
Ground
point
Click
6