Advertisement
Quick Links
Speaker Hardware
Wiring Harness x2
x6
x2
Safety Lanyard x2
*BEFORE WIRING ANYTHING PLEASE MAKE SURE YOUR BOAT, DECK, AND AMP ARE ALL TURNED OFF*
A
• You will need to connect the included 20" Deutsch wiring harnesses to your tower
wires according to the chart in STEP B. Please note the Black and Blue wires of the
wiring harnesses are not used in this installation
B
www.roswellmarine.com
If you have any questions please call : 1-321-638-1331
Deutsch
Wire Strippers
& Crimps
Speaker Wire
White
Port
White/Black
Speaker Wire
White
Starboard
White/Black
Port Spk +
Crimp
Port
Tools Required
Phillips
Screw Driver
Pencil
5/16"
Allen Key
NOTES
Wiring Diagram
Tower Wire
Green
Green & Black
Tower Wire
Purple
Purple & Black
Port Spk –
Stbd Spk +
Vamp Spin Speaker
Installation Instructions
Function
Port Speaker +
Port Speaker –
Function
Stbd Speaker +
Stbd Speaker –
Stbd Spk –
Crimp
Starboard
Rev. 28-May-15
Pg. 1/2
Advertisement
Related Manuals for Roswell Moomba
Summary of Contents for Roswell Moomba
- Page 1 Vamp Spin Speaker Installation Instructions Speaker Hardware Tools Required Phillips Screw Driver Pencil Deutsch Wiring Harness x2 Wire Strippers 5/16” & Crimps Allen Key Safety Lanyard x2 NOTES *BEFORE WIRING ANYTHING PLEASE MAKE SURE YOUR BOAT, DECK, AND AMP ARE ALL TURNED OFF* •...
- Page 2 Vamp Spin Speaker Installation Instructions Apply RED Loctite to 3 bolts and fasten speaker With your stereo/amp switched off, insert the Deutsch through tower speaker plate using a 5/16” allen key. wiring harness into speaker. Torque bolts to 20 ft/lb 5/16”...
Need help?
Do you have a question about the Moomba and is the answer not in the manual?
Questions and answers