Download Print this page
WAC Lighting dweLED 299-LED Wall Sconce Installation Instructions

WAC Lighting dweLED 299-LED Wall Sconce Installation Instructions

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS
299-LED Wall Sconce
BL-29903
CAUTION: TO PREVENT ELECTRICAL SHOCK, ENSURE ELECTRICITY HAS BEEN TURNED OFF AT THE CIRCUIT BREAKER
BEFORE BEGINNING.
Read all instructions before installing.
-
System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local
-
regulations.
When handling the fixture, do not apply pressure to the LEDs. Hold the fixture by the base only.
-
Retain installation instructions for future maintenance reference.
-
WARNING: All parts must be used as indicated in these instructions. This product is designed for use only with the supplied parts
and/or accessories designated for use by dweLED. Substitution of parts or accessories not designated for use with this product by
dweLED could result in personal injury or property damage, and will void the warranty. Contact an authorized dealer or the
manufacturer if any parts are damaged or missing.
MAINTENANCE NOTE:
Coastal conditions may cause mineral and residue build-up on the fixture. We recommend that customers in
coastal areas clean all external surfaces of the fixture once every two weeks with a wet cloth.
MISE EN GARDE: Pour éviter tout choc électrique, assurez-vous que le disjoncteur soit mis hors tension avant de
commencer.
Lisez toutes les instructions avant l'installation.
-
-
Le système doit être installé par un électricien licensié conformément au code national de l'électricité (NEC), et également
aux règlements locaux.
Lors de la manipulation du luminaire, n'appuyez pas sur les LED. Tenez-le uniquement par la base.
-
ATTENTION: Toutes les pièces doivent être utilisées comme indiqué dans ces instructions. Ce produit est conçu pour être utilisé
seulement avec les pièces et/ou accessoires fournis pour être utilisés avec les produits dweLED. Remplacer des pièces ou
accessoires non conçus pour ce produit dweLED pourrait causer des dommages corporels ou matériels et pourrait également causer
l'annulation de la garantie. Veuillez contacter un revendeur autorisé ou le fabricant si des pièces manquent ou sont endommagées.
NOTE D'ENTRETIEN:
Les conditions côtières peut causer une accumulation de minéraux et de résidue sur le luminaire. Nous
recommendons aux clients qui resident dans les zones côtières de nettoyer toutes les surfaces externes du luminaire une fois toutes
les deux semaines avec un chiffon humide.
HARDWARE
www.dweLED.com
Phone (800) 526.2588
Fax
(800) 526.2585
dweLED retains the right to modify the design of our products at any time as part of the company's continuous improvement program. Jan 2019
Headquarters/Eastern Distribution Center
44 Harbor Park Drive
Port Washington, NY 11050
Central Distribution Center
1600 Distribution Ct
Lithia Springs, GA 30122
Western Distribution Center
1750 Archibald Ave
Ontario, CA 91761
1

Advertisement

loading

Summary of Contents for WAC Lighting dweLED 299-LED Wall Sconce

  • Page 1 INSTALLATION INSTRUCTIONS 299-LED Wall Sconce BL-29903 CAUTION: TO PREVENT ELECTRICAL SHOCK, ENSURE ELECTRICITY HAS BEEN TURNED OFF AT THE CIRCUIT BREAKER BEFORE BEGINNING. Read all instructions before installing. System is intended for installation by a licensed electrician in accordance with the National Electrical Code (NEC) and local regulations.
  • Page 2 INSTALLATION INSTRUCTIONS 299-LED Wall Sconce BL-29903 Fig.1 Portable Installation Fig.2 Surface Mount Installation Fig.3 Recessed Mount Installation Fig.4 Wiring www.dweLED.com Headquarters/Eastern Distribution Center Central Distribution Center Western Distribution Center Phone (800) 526.2588 44 Harbor Park Drive 1600 Distribution Ct 1750 Archibald Ave (800) 526.2585 Port Washington, NY 11050 Ontario, CA 91761...
  • Page 3 INSTALLATION INSTRUCTIONS 299-LED Wall Sconce BL-29903 PREPARATION Shut off the power at the circuit breaker and remove existing fixture, including the crossbar. Carefully unpack your new fixture and lay out all the parts on a clear area. Be careful not to lose any small parts necessary for installation.