Installation - Axis T90A 2x Installation Manual

AXIS T90A Installation Guide

Installation

Follow these installation procedures:
1. Mount the illuminator.
2. Mount the PSU.
3. Extend or reduce the lead length as you wish.
4. Connect the LED output.
5. Adjust the PSU and telemetry if required. (Telemetry input is used when you require to remotely
control the illuminator.)
6. Connect the mains.
CAUTION: Red = +ve
!
LED output x2
Telemetry input
5
1
3
Black = -ve
(polarity sensitive)
Mains in
2
4
6
! CAUTION: Connect all leads
and tighten fixings
Page 5
!
6