BT Freestyle 2100 User Manual page 19

BT Freestyle 2100 ~ Issue 3 ~ 2nd Edition ~ 22nd July '03 ~ 5563
To adjust the Recall setting
The default recall setting (option 2)
is set at 100ms which is used by the
Public Telephone Network as well as
most PBX's. Normally you will not
need to change this setting but some
PBX's may require a longer recall in
which case option 1 (280ms) should
be selected.
There are 2 settings to choose from.
Press the PROG button.
Prog
R Press the R button.
Press 1-2 for the setting you want.
Prog Press the PROG button to confirm.
To restore the default settings
This will return your phone to its
original factory settings.
Press the PROG button.
Prog Prog
Press the 9 button.
9 9
Enter the system PIN number
(factory setting 0000 ) .
Press the PROG button. The default
Prog Prog
handset settings are restored.
All manuals and user guides at all-guides.com
To restore the default settings To change the system PIN number
The system PIN number is factory
set to 0000 and is used to access and
program certain functions. If you
wish you can change this PIN to a
four digit number of your choice.
Press the PROG button.
Prog
Press the 1 button,
1
display shows - - - -.
Enter the existing PIN (0000 if it
has not yet been changed since
purchase), display shows 0000.
Press the PROG button,
Prog
display shows - - - -.
Enter your new PIN,
display shows 0000.
Press the PROG button,
Prog
display shows - - - -.
Enter your new PIN again,
display shows 0000.
Press the PROG button, the unit
Prog
beeps and the display returns to idle.
Your PIN is now changed.
20