JVC KD-S35 Instructions Manual page 21

Symptoms
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required ("READING"
keeps flashing on the display).
• Tracks do not play back in the order you have
intended them to play.
• The elapsed playing time is not correct.
• The correct characters are not displayed (e.g.
album name).
• The iPod does not turn on or does not work.
• The sound is distorted.
• "NO IPOD" appears on the display.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• "NO FILES" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• "CANNOT PLAY" appears on the display.
Remedies/Causes
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
The playback order is determined when the files are
recorded.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
Deactivate the equalizer either on the unit or the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
The headphones are disconnected during playback. Turn
off the unit's power and turn it on again.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
No tracks are stored. Import tracks to the iPod.
Reset the iPod.
Communication error occurs.
Disconnect and connect the cable to the iPod again.
21