Bluetooth Settings - JVC KW-XG700 Instructions Manual

Bluetooth settings

You can change the registered Bluetooth device setting
listed on the right column according to your preference.
1
Select "BT-PHONE" or "BT-AUDIO."
2
Enter the Bluetooth menu.
3
Select "SETTINGS."
4
Select a setting item.
*
1 Appears only when a Bluetooth phone is
connected.
*
2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message.
* 3 Bluetooth Audio: Shows only "VERSION."
5
Change the setting accordingly.
28
Setting menu
( : Initial)
AUTO CNT (connect)
When the unit is turned on, the connection is
established automatically with....
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found at first.
AUTO ANS (answer)
Only for the device being connected for "BT-PHONE."
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for "BT-PHONE."
AUTO: The unit informs you of the arrival of
a message by ringing and displaying
"RCV MSG" (receiving message).
MANUAL: The unit does not inform you of the arrival of
a message.
MIC SET (microphone setting)
Only for the device being connected for "BT-PHONE."
Adjust microphone volume connected to the Bluetooth
adapter, [LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions are
shown.