Listening To The Satellite Radio - JVC Exad KW-AVX706 Instructions Manual

Listening to the satellite radio

Before operating, connect either one of the following (separately purchased) to the CD changer jack
on the rear of this unit.
• JVC SIRIUS radio DLP—Down Link Processor, for listening to the SIRIUS Satellite radio.
• XMDirect Universal Tuner Box—With a JVC Smart Digital Adapter (XMDJVC100: not
TM
supplied), for listening to the XM Satellite radio.
For SIRIUS Radio
Activate your subscription after connection:
1 Turn on the power.
2 Select "SAT" for the source.
JVC DLP starts updating all the SIRIUS
channels. (See "GCI update"column below.)
• Once completed, JVC DLP tunes in to
the preset channel, CH184.
3
Check your SIRIUS ID, see page 45.
4
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can
call SIRIUS toll-free at 1-888-539-
SIRIUS (7474).
"Subscription Updated Press Any Key to
Continue" appears on the monitor once
subscription has been completed.
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be
heard.
For SIRIUS: "Channels Updating XX% completed" appears.
For XM: "UPDATING" appears.
• Update takes a few minutes to complete.
• Do not press any button or perform any operation until updating is completed.
For XM Radio
Activate your subscription after connection:
1 Turn on the power.
2 Select "SAT" for the source.
XMDirect Universal Tuner Box starts
TM
updating all the XM channels. "Channel
1" is tuned in automatically. (See "GCI
update"column below.)
3 Check your XM Satellite radio
ID labelled on the casing of the
XMDirect Universal Tuner Box, or
TM
tune in to "Channel 0" (see page 32).
4 Contact XM Satellite radio on
the internet at <http://xmradio.
com/activation/> to activate your
subscription, or you can call 1-800-
XM-RADIO (1-800-967-2346).
Once completed, the unit tunes in to one
of the available channels (Channel 4 or
higher).
31
EXTERNAL DEVICES