Silvercrest SWKK 2400 A1 Operating Instructions And Safety Instructions page 15


Fill the kettle (3) with drinking water, at least up to the "MIN 0.5L" mark inside and up to the
"1.7L MAX" mark on the water level indicator (4) and close the lid (11) by pressing it down
until it clicks into place.
When the kettle (3) is placed on the base (6), it can be freely rotated 360°
around the vertical axis. It does not need to engage in a certain position. This
allows you to rotate the kettle (3) such that you can easily check the water level
indicator (4) and rotate the kettle (3) so that the steam is directed away from
you.

Plug the mains plug into an easily accessible mains socket.

Place the kettle (3) on the base (6) and press the ON/OFF switch (8) down to switch the
kettle (3) on. The LED light ring (5) lights blue. The kettle (3) will make noises during the
heating process. This is not a malfunction.
DANGER: Risk of burns
Rotate the kettle (3) so that the steam is directed away from you. Otherwise
you could get burnt.
Only boil water with the lid (11) closed. Otherwise the kettle (3) could boil
over and cause burns and property damage.

As soon as the water boils, the kettle (3) turns off. The ON/OFF switch (8) returns to the up
position automatically and the LED light ring (5) goes out.

Disconnect the power cable (7) plug from the mains socket, remove the kettle (3) from the base
(6) and pour the water out.
DANGER: Risk of burns
Never touch the kettle (3) housing during or immediately after
operation. Only ever hold or carry the kettle (3) using the handle (9).
When the water boils, hot steam will be emitted. Be careful not
to burn yourself. Wear oven gloves if necessary. Turn the kettle (3)
around so that the steam is directed away from you.
SilverCrest SWKK 2400 A1
English - 13