Subscribe to Our Youtube Channel
Related Manuals for Lanpro LP-289ai
Summary of Contents for Lanpro LP-289ai
- Page 1 Wireless - Equipment LP-289ai 123 Manual for AP Mode setup. LP289ai_M123_ENE02W LP-289ai 123 Manual for AP Mode setup. www.lanpro.com...
- Page 2 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for AP Mode setup The following instructions will let you configure your LP-289ai in AP Mode. Once the 123 manual for assembly of the LP-289ai has been executed, proceed to configure it by first connecting a cable coming from the LP-289ai to the PoE port named: To Odu as shown in figure 1.
- Page 3 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for AP Mode setup In the window shown in figure 5, select: Use the following IP address and next input an IP address in the default range of the LP-289ai. In this example, we have selected address 192.168.1.201, the LP-289ai has a default address...
- Page 4 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for AP Mode setup In the window of figure 8 input in: Name: the word: admin and the in the: password: the word: password. Figure 8 In the window of figure 9, you have the option of configuring eight (8) Virtual APs or VAPs.
- Page 5 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for AP Mode setup In the window shown in figure 11, select the virtual AP you wish to configure. Only one is enabled by default and without security. Select: Edit if you wish to change it.
- Page 6 Wireless - Equipment - 5.8 GHz - LP-289ai 123 Manual for AP Mode setup It is important to mention that all the VAPs will share the set of keys in WEP, being only able to change the default key used for authentication and encryption. In order to enable another VAP, you must select the box named: Enable and then select: Apply as shown in figure 14.
Need help?
Do you have a question about the LP-289ai and is the answer not in the manual?
Questions and answers