Table of Contents
Advertisement
TOAST
1. Make sure the Crumb Tray is firmly in place in the bottom of the
Convection Toaster Oven.
2. Plug into a 120V AC electrical wall outlet.
3. Open the Glass Door and center bread or food on the Wire Pizza
Rack. Close the Glass Door.
4. Turn the Function Control to TOAST.
5. Turn the Timer Control to approximately 5 minutes. The Power
Light will illuminate.
NOTE: Do not set the Timer Control to the STAY ON position when
using the TOAST function.
NOTE: Watch toast until desired color is achieved.
6. When TOAST time is complete, a signal will sound, and the Timer
Control will finish in the 0 position; the Convection Toaster Oven
will shut off automatically; the Power Light will go off.
NOTE: If toasting is completed before the Timer Control shuts the
Convection Toaster Oven OFF, you may shut the Convection
Toaster Oven OFF manually by turning the Timer Control to the 0
position. The Power Light will go off.
7. Open the Glass Door. Wear protective oven mitts and use the
Tray/Rack Handle to pull the Wire Pizza Rack out from the
Convection Toaster Oven. Be careful when removing toast from
the back of the Pizza Rack. The inside of the Convection Toaster
Oven is very hot. Close Glass Door.
8. Unplug unit and allow to cool before cleaning.
WARNING: DO NOT LEAVE Convection Toaster Oven
UNATTENDED DURING TOASTING.
See User Maintenance Instructions. Unplug when not in use.
9
Advertisement
Table of Contents
