Advertisement
5.3.
SCHEDULED MAINTENANCE TABLE (NOT ENGINE)
Maintenance
After Use.
Operations.
•
Drain condensation.
check oil level.
check guards/covers.
check for oil leaks.
check for noise or
vibration.
check for air leaks.
clean compressor.
clean air filter.
check safety relief valve.
check belt tension.
change pump oil.
Replace air filter.
check fittings.
Inspect Pressure Tank.
6. TROUBLESHOOTING
Fault
Pressure drop in the tank.
Pressure drops when compressor is idle.
Safety valve operates below max pressure.
Engine and pump run, but no air produced.
Engine stops and does not restart.
Relief valve does not open when maximum
pressure is reached, safety valve operates.
compressor does not achieve maxiumum
pressure and overheats.
compressor makes metallic rattle.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited 2013
Daily.
Weekly.
Monthly.
•
•
•
•
•
•
•
•
•
•
Possible Cause
Air leaks at connections.
non-return valve seal defective.
Valves leaking or head gasket damaged.
Out of fuel or engine fault.
Valve failure or valve incorrectly set.
Head gasket or valve fault.
Bearing or piston fault.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycle centre and disposed of in a manner
which is compatible with the environment.
When the product is no longer required, it must be disposed of in an
environmentally protective way.
email sales@sealey.co.uk or phone 01284 757500.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
5.4.
RECOMMENDED OILS
Recommended oil for compressors:
200 hrs.
- for ambient temperatures ranging from +5°c to +25°c.
SEALEY cPO (or equivalent) SAE 40 compressor oil.
- for ambient temperature below +5°c:
SAE 20 compressor oil.
•
•
•
•
Faulty valve.
check fuel. If OK, contact Authorised Service Agent.
Environmental Protection.
Remedy
Run compressor to max. pressure, switch off.
Brush soap solution over connections and look for
bubbles. Tighten connections showing leaks.
If problem persists contact Authorised Service
Agent.
Empty air tank, remove the relief/non-return valve
(fig.2 & fig.9) and clean the seat 'D'.
If necessary replace the seal 'E'.
contact Authorised Service Agent.
check for leaks, or contact Authorised Service
Agent.
contact Authorised Service Agent.
contact Authorised Service Agent.
contact Authorised Service Agent.
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
SA5040
Issue: 2 (SP) - 23/08/13
Advertisement
