Repair
Repair
Battery Pack Replacement
NOTE: Prior to replacing batteries, use Troubleshoot-
ing - LineDriver, page 18, to determine if the batteries
are the cause of the problem. Also, use a battery load
tester to confirm the batteries need replacement. Always
replace all four batteries.
1. Turn power switch OFF. Turn lights OFF. Discon-
nect 12V accessories.
2. Remove Tool Tray.
3. Remove rear screws of Seat Lid.
4. Pivot Operator Seat forward slowly.
5. Remove battery cables.
16
6. Remove battery holders. Remove batteries and
recycle according to below.
7. Install new batteries in orientation shown. Install
holders and cables.
8. Reinstall seat and Tool Tray.
9. Charge batteries. See Charging the Batteries, page
9.
Battery Disposal
Do not place batteries in the trash. Recycle batteries
according to local regulations.
3A6623C