Advertisement
This appliance must be grounded. If it should malfunction
or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric
shock. This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER
Improper connection of an equipment-grounding
conductor can result in risk of electric shock. Check
with a qualified electrician or service person if you are
in doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance. If
it will not fit the outlet, have proper outlet installed by a
qualified technician.
This appliance is for use on a nominal 120 volt circuit
and has a grounding plug that looks like the plug
illustrated in Figure A. A temporary adapter which looks
like the adapter illustrated in Figure B may be used to
connect this plug to a two-pole receptacle, as shown,
if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly
grounded outlet, Figure A, can be installed by a
qualified electrician. The green colored rigid ear, lug, or
WARNING! To reduce the risk of fire, electric
shock or injury; only use dryer as described in
this manual.
1.
Plug in to a standard outlet with the correct voltage
and amperage for the unit.
2. Place the dryer in the desired operating position.
3. Set the switch at the desired speed: low, medium or
high. (See Figure 1)
Figure 1
PAGE 2 OF 3
GROUNDING INSTRUCTIONS
OPERATING INSTRUCTIONS
OFF
LOW
HIGH
MED
the like extending from the adapter must be connected
to a permanent ground such as a properly grounded
outlet box cover. Whenever the adapter is used, it must
be held in place by a metal screw.
NOTE: In Canada, the use of a temporary
adapter is not permitted by the Canadian
Electrical Code.
Figure A
Grounding blade
is longest of the
three blades
Figure B
Adapter
Metal Screw
Grounding Tab
4. Check for proper operation before leaving the unit
unattended. Do not move or carry the dryer when it
is running.
5. Unwrap cord before using. (See Figure 2)
Figure 2
Grounded Outlet Box
Grounded Outlet Box
0311 IH-2594
Advertisement
