Safety Precaution For Service Manual; Voltage Selection; Specifications - Sharp CD-MPS440W Service Manual

Table of Contents

Advertisement

[2] SAFETY PRECAUTION FOR SERVICE MANUAL

Precaution to be taken when replacing and servicing the Laser Pickup.
The AEL (Accessible Emission Level) of Laser Power Output for this model is specified to be lower than Class 1 Requirements. However, the follow-
ing precautions must be observed during servicing to protect your eyes against exposure to the Laser beam.
1) When the cabinet has been removed, the power is turned on without a compact disc, and the Pickup is on a position outer than the lead-in posi-
tion, the Laser will light for several seconds to detect a disc. Do not look into the Pickup Lens.
2) The Laser Power Output of the Pickup inside the unit and replacement service parts have already been adjusted prior to shipping.
3) No adjustment to the Laser Power should be attempted when replacing or servicing the Pickup.
4) Under no circumstances look directly into the Pickup Lens at any time.
5) CAUTION - Use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation
exposure.

[3] VOLTAGE SELECTION

Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage as follows.
Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110V,127V,220V or 230V - 240V AC).

[4] SPECIFICATIONS

General
Power source
AC 110/127/220/230-240 V, 50/60 Hz
Power
151 W
consumption
Dimensions
Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 342 mm (13-1/2")
Weight
7.2 kg (15.9 lbs.)
Amplifier
Output power
RMS: 150 W (75 W + 75 W) (10 % T.H.D.)
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals
Video/Auxiliary (audio signal):
500 mV/47 k ohms
CD player
Type
3-disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
1-bit D/A converter
Frequency
20 -20,000 Hz
response
Dynamic range
90 dB (1 kHz)
Specifications for this model are subject to change without prior
notice.
Tuner
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,720 kHz
Cassette deck
Frequency
125 - 8,000 Hz (normal tape)
response
Signal/noise ratio
50 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter
0.3 % (WRMS)
Speaker
Type
Twin-drive speaker system
10 cm (4") full-range speaker 2
Maximum input
150 W
power
Rated input power
75 W
Impedance
6 ohms
Dimensions
Width: 200 mm (7-7/8")
Height: 305 mm (12")
Depth: 220 mm (8-11/16")
Weight
3.5 kg (7.7 lbs.)/each
1 – 2
CD-MPS440W

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents