Kraus KD1US17B Installation Instructions Manual

Kraus Undermount Stainless Steel Sink Installation Instructions
For the Attention of the Customer and the Installer:
1. For best results, Kraus recommends that the solid surface countertop cut-out should only be prepared by
a professional fabricator, and undermount sinks should only be installed by a professional installer.
2. The enclosed paper template represents Kraus recommended countertop cut-out specification and sink
mounting style.
3. Sink installation and countertop cut-out choices are not limited to Kraus specifications. Installer and
customer must discuss these options, and reach an agreement on alternate countertop cut-out dimensions
and sink installation methods prior to preparation of the countertop. Kraus will not be held responsible
for alternate choices of sink installation and countertop cut-out.
4. In addition to the Kraus paper template, electronic (.dxf) files for countertop cut-outs are available on the
Kraus website www.kraususa.com
5. Sink mounting requirements will vary according to countertop selection. Hardware for mounting the sink
to the countertop is not included, and should be specified by the countertop fabricator for the specific
countertop selection.
6. Sink may have sharp edges, please use caution when handling.
7. Inspect the sink unit prior to installation to confirm acceptance. Do not install a damaged unit.
8. Kraus USA is not responsible for any damage to sink or countertop incurred during installation.
9. Please follow all local plumbing and building codes.
KRAUS CUSTOMER SERVICE
Toll-free: 1.800.775.0703
Phone: 1.646.461.9199
Email: customerservice@kraususa.com
Hours: 9:00am to 8:00pm (EST) Monday thru Friday
Installation Instructions
KD1US17B, KD1US25B, KD1US33B and KD1UD33B
INSTALLUS 1 May 2017