Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eminent EM394 Series
Summary of Contents for Eminent EM394 Series
- Page 1 EM394X UPS 600-1000-1500VA...
-
Page 2: Table Of Contents
11.0 Warning and points of attention ................. 12 12.0 Warranty conditions ................... 14 1.0 Introduction Congratulations with the purchase of this high-quality Eminent product! This product has undergone extensive testing by Eminent’s technical experts. Should you experience any problems with this product, you are covered by Eminent... -
Page 3: Functions And Features
ENGLISH warranty. Please keep this manual and the receipt in a safe place. Register your product now on www.eminent-online.com and receive product updates! 1.1 Functions and features The EM3940/41/42 are UPS systems designed to effortlessly handle a power failure without the loss of important data. Because these devices are also equipped with a ten-minute backup function, you can shut down your computer or have it make a backup without the chance of losing data. -
Page 4: Remarks About Safety
ENGLISH 2.0 Remarks about Safety In order to keep safe in using the UPS, please comply with the following: • Please charge the battery at least 24 hours before the UPS is in operation. • After the battery is discharged or over three months without operation, the battery should be charged immediately for at least 12 hours, ensuring the battery is full and avoiding any unnecessary damage of the battery. -
Page 5: Working Principle
ENGLISH 3.0 Working Principle 3.1 In AC mode When UPS is in normal working mode, AC goes through the filter and the harmful waves are filtered. After that, AC charges the battery and meanwhile, passes UPS AVR and the filter and provide power for the equipment. 3.2 AC Failure When AC fails, the battery will supply power to the inverter and then passes filter and provide power for the equipment, ensuring the continuous power supply. -
Page 6: Battery And Charging
ENGLISH 3.4 Battery and Charging: • When the UPS is connected to AC, the charger will charge the battery fully in about 10 hours. • When the battery is used up, please turn off the UPS and charge the battery for a least 10 hours when. -
Page 7: The Function Of The Self-Set Frequency
ENGLISH 4.5 The Function of the Self-set Frequency When the UPS is turned on for the first time, the acquiescence frequency is 50/60Hz; when it is connected to AC, the frequency is automatically set to 50Hz or 60Hz in accordance with AC. 5.0 LCD Display The UPS is equipped with an LCD display. -
Page 8: Upsilon 2000 Software
ENGLISH SUGGESTION: This UPS is the power supply for the computer, monitor and hard disk(CD) etc. It has a limited backup time for the load, so you'd better not connect a printer or other equipment to it. Press the ON/OFF button on the front of the UPS to turn it on. You will hear a short beep. -
Page 9: Upsilon 2000 Options And Settings
The option ‘Email’ Enables you to setup E-mail messages that will be send from UPSilon 2000 to a specified email. You can also specify which events you wish to receive an e-mail for. The option ‘SMS’ is not supported by Eminent ACPI The option ‘ACPI’ (Advanced Configuration and Power Interface) provide the possibility to change the UPS Name/Manufacturer/Date of installation. -
Page 10: Tasks
10 | ENGLISH 7.2.2 Tasks The menu ‘Tasks’ allows you to plan when UPSilon 2000 will turn on the UPS or turn off both the computer and the UPS. You can also plan for the UPS to execute a number of self-tests. Choose a date and click ‘Add’... -
Page 11: Battery Maintenance
11 | ENGLISH 8.2 Battery Maintenance The UPS contains a sealed lead-acid maintenance-free battery (batteries). Bad environmental conditions, to high discharge frequency, to high temperature, etc will dramatically reduce the battery life. The battery life will also reduce even if it is not used. -
Page 12: Frequently Asked Questions And Other Related Information
A power socket is needed which should be close and easy accessible from the device. Repairing of the device should be done by qualified Eminent staff. Never try to repair the device yourself. The warranty immediately voids when products have undergone self-repair and/or by misuse. - Page 13 - Unplug the device when you don’t use it for a long time - Use the device at a well ventilated place *Tip: Eminent manuals are written with great care. However, due to new technological developments it can happen that a printed manual does not longer contain the most recent information.
-
Page 14: Warranty Conditions
Eminent warranty. Products are not covered by the Eminent warranty when exposed to incorrect/improper use, external influences or when opening the service parts of the product by parties other than Eminent.
Need help?
Do you have a question about the EM394 Series and is the answer not in the manual?
Questions and answers