Settings - Grundig T 55-830 text Manual

ATS
OK
ATS
10

SETTINGS

__________________________________________________________________________
Assigning Channel Positions with the ATS Automatic Channel Search
and Memory System
The television set is equipped with an automatic channel search system.
You start the search and can then sort the television channels into order of preference.
There are 69 channel positions available which as required can be assigned television channels
from the aerial or from the cable connection.
You can also delete television channels from the channel list which were found more than once or
which have poor reception.
1
Switch the television set on with the
– »ATS« is displayed on the screen.
Note:
If »ATS« is not displayed, press »AUX« for approx. 4 seconds until the display appears.
2
Start the ATS search with the
– The ATS search procedure can take over a minute.
– Once the television set has stored all television channels it will switch to channel position 1.
Note:
Further settings – such as deleting unwanted television channels or changing the order of
television channels later – are described on the next page.
Details of limiting the channel position selection and manually inputting television channels can
be found in the "SPECIAL SETTINGS" chapter on Page 21.
»I O « button on the television set.
»OK « button.