Related Manuals for BestWater BWE 2000
Summary of Contents for BestWater BWE 2000
- Page 1 Instruction Manual BWE 2000 Stationary water softening appliance with control system RX 79BD / 82BD...
- Page 2 www.bestwater.de...
-
Page 3: Table Of Contents
Fill level control and salt refilling ---------------------------------------------------------------------------- 12 11.1. Initial start-up ------------------------------------------------------------------------------------------------ 12 11.2. Checking the Fill level and refilling with salt ----------------------------------------------------------- 12 11.3. Prevention of clumping ------------------------------------------------------------------------------------- 12 Problem detection ----------------------------------------------------------------------------------------------- 13 Certificate ---------------------------------------------------------------------------------------------------------- 14 Disposal ------------------------------------------------------------------------------------------------------------ 14 TERMS OF WARRANTY ----------------------------------------------------------------------------------------- 14 www.bestwater.de... -
Page 4: Important Terms Of Use
Dear customer, Thank you for deciding to own our BWE 2000 water softening appliance with an RX control system. The functioning of this appliance is based on modern ceramic rotating plate technology and is resistant against deposition of impurities in the water. -
Page 5: How Does The Water Softening Device Work
3. Delivery Parts List Description amount Stationary located water 1 piece softening appliance Bypass 1 piece 12V power supply 1 piece. 2.5-inch spanner for the head collar 1 piece www.bestwater.de... -
Page 6: Overall View Of The Water Softener Appliance
- Protect the unit from overfilling. There is an overflow pipe on the side wall of the housing. The float valve regulates the refilling process of water and supplies the saline solution. Proper functioning ensures the correctness of the revitalisation process. www.bestwater.de... -
Page 7: Preparation For The Installation
980 g NH + / L Size [mm] 460x240x1080 490x300x1055 530x480x1115 Weight [kg] External Bypass Built in water softener Connection possibility for Chlorine generator ** * Reference weight without water and salt ** only in D version of the head-closed menu www.bestwater.de... -
Page 8: Water Supply Connection
If the brine inlet and tank filling system is not working properly, the tank may overfill. In this case, the overflow pipe serves as drain for the excess brine. In order to avoid flooding the room in the event of a malfunction, the overflow pipe should be connected to the wastewater drain with a flexible hose. www.bestwater.de... -
Page 9: Operating Mode
Provides a quick rinse of the brine residues on the ion exchanger. This improves the correct functioning of the ion exchanger. The water is drawn in from above and directed through the ion exchange resin and then discharged through the central tube. www.bestwater.de... -
Page 10: Rx Control Unit
In open menus you can edit the basic parameters, i.e. set the time and the water hardness, as well as determine the revitalisation time. Switching between the parameters and changing the values is done by pressing the "up-down" buttons. The parameter selection and the confirmation of the changes are confirmed with "Enter". www.bestwater.de... -
Page 11: Description Of The Control Buttons
During water treatment, the screen shows the following: In Operation - During revitalisation: The current operating mode number (see description below) and the current amount of water that the unit can process without revitalisation being required. A-Menu / confirm; B- Force revitalisation / Back; C-down; D-up www.bestwater.de... -
Page 12: Fill Level Control And Salt Refilling
Persistent clots can be broken open with a long screwdriver (CAUTION). If the clumps are due to poor salt, rinse the tank completely. Then fill the tank with salt, which is suitable for this type of water treatment system. www.bestwater.de... -
Page 13: Problem Detection
Blocked injector Contact a specialist Foreign matter in brine Change the content of the brine tank tank Interruptions when Check the power supply. flushing into the brine tank Wrong setting for brine Change the settings that affect brine tank tank www.bestwater.de... -
Page 14: Certificate
- The warranty is conditional on proper installation and commissioning of the device in accordance with the instructions by a qualified person. - It is the responsibility of the user to have the device tested by an authorized person at least once a year. www.bestwater.de... - Page 15 - improper installation, commissioning and use of the device; - failure to carry out the inspection by a specialist in due time; - Unauthorized repairs, modifications and alterations by the buyer or third parties that do not comply with the instructions; - mechanical damage to the device www.bestwater.de...
- Page 16 Impress: Adress: BWI BestWater GmbH Manager: Anita Gamon Hermann–Löns–Straße 17 14547 Beelitz GERMANY Contact: E-Mail: info@bestwater.de Internet: www.BestWater.de Online-Shop: www.Bwishop.de Tel: +49 33204 62 86 0 Fax: +49 33204 62 86 11 HRB 26901 P USt-IdNr: DE293844629...
Need help?
Do you have a question about the BWE 2000 and is the answer not in the manual?
Questions and answers