Toro TimeCutter 74726 Operator's Manual page 34

1. Bypass-lever locations
2. Lever position for
operating the machine
6. When finished, ensure that the key has been
returned to the
STOP
the battery charge.
Note:
If the machine fails to move, the electric brake
may still be engaged. You can release the electric
brake manually if necessary; refer to
Electric Brake (page 47).
Operating the Machine
Move the bypass levers rearward through the keyhole
and down to lock them in place as shown in
Note:
Do this for each lever.
Figure 35
3. Lever position for pushing
the machine
position to avoid draining
Releasing the
Figure
g017303
35.
34