Use The Memory Function; To Read The Average Value; To Read The Measurement Value; To Delete The Memory Value - Quoticare BP101U Instruction Manual

Use the Memory Function

Use the Memory Function
The unit stores the blood pressure and pulse rate in the memory after
completing a measurement every time. It can automatically store 90 sets of
measurement values . The oldest record is deleted to save the latest
measurement value when more than 90 sets.
The unit also calculates an average reading based on the values of the latest
3 times measurement taken.

To read the average value

To read the average value
Press the "MEM" Memory button. The average value symbol will
display.
T read the measurement value read the measurement value
O
Press the "MEM" Memory button to view the latest measurement
value with the measuring date and time.
Press the "SET"Setting button to view the oldest recorded value
with the measuring date and time.
Long press the button and the value quickly changes.
Alternating display
The 1st latest
measurement value
Turn to next
the average value of the latest
3 times measurement taken
.............................................
Forward
Backward
The 2nd latest The 60th latest
measurement value measurement value
18
Use the Memory Function Use the Memory Function

To delete the memory value

To delete the memory value
In the memory reading mode, press the "SET" Memory button for 4-6
seconds the unit will display "
Press the "SET" Memory button again and LCD will display "
If you are sure all the data of corresponding user can be deleted, press
the " " button, all the corresponding user's data will be deleted
and the unit will turn off.
Note: if you have set " ", but do not press a button for 2 minutes,
the product will shut off automatically, but the corresponding
user's blood pressure data will not be deleted. The delete
operation must be confirmed by user.
.........................................
".
19
".