Setting The Power Level - JDS Uniphase OBS-55 Operating Manual

5
O

Setting the power level

The power level
• can be set in LED off and on mode
• will be stored when the power is switched off.
Power level ranges
CW mode:
Modulated:
To set the power level:
1. Press [Level Adjust].
The display changes to EDIT modus.
2. Press [▲▼] to select the level (HIGH, MIDDLE or
LOW).
3. Press [MENU ENTER] to set the level and leave EDIT
mode.
JDSU
PERATION
High
0 dBm
-3 dBm
OBS-55
Middle Low
-3 dBm -6 dBm
-6 dBm -9 dBm
25