Advertisement
INSTRUCTIONS FOR USE
• Comb through dry hair and divide into sections.
• To turn on the appliance, press the
• The appliance will automatically set to 200°C and will blink until the
temperature has been reached. Once the temperature has been
reached, the indicator will remain solid in colour.
• To select a temperature setting suitable for your hair type, press the
'HIGH' or 'LOW' button. (See Heat Settings section below)
• Take a section of hair and place between the plates, close to the
roots.
• Close the plates together and hold the hair firmly between the
plates.
• Slide down the length of hair, from root to tip.
• Repeat as necessary through the remaining sections.
• Allow the hair to cool before combing through.
• After use, press the button marked
appliance.
• For additional heat protection after use, close the appliance and
slide the safety switch at the end of the appliance to lock the plates
together.
• Allow to cool before storing away.
Heat Settings
If you have delicate, fine or coloured hair, use the lower heat settings.
For thicker hair, use the higher heat settings. It is suggested to always
complete a test on initial use to ensure the correct temperature is
used on the hair type. Start on the lowest setting and increase the
temperature until desired result is achieved.
There are 6 heat settings available to suit all hair types, 140°C, 160°C,
180°C, 200°C, 220°C and 235°C
LOW heat button: When pressing the LOW button, you can switch
between the lower heat settings of 140°C, 160°C, 180°C or 200°C only.
Keep pressing the button until it moves to the temperature you desire.
To increase the heat setting press the HIGH heat button.
button.
to switch off and unplug the
Advertisement
