Specifications; Standard Accessories; Optional Accessories (Sold Separately) - Hitachi DH 18VB Handling Instructions Manual

SPECIFICATIONS

Voltage (by areas)*
Input
Non-load speed
Full-load impact rate
Capacity: concrete
steel
wood
Weight (without cord and side handle)
* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Side handle ................................................................. 1
(2) Depth gauge ............................................................... 1

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (rotation + striking)
Drill bit (Slender shaft)
Drill bit (Slender shaft)
Outer diameter
3.4 mm
3.5 mm
Drill bit (taper shank) and taper shank adapter
Drill bit (tape shank)
Outer diameter
11.0 mm
12.3 mm
12.7 mm
14.3 mm
14.5 mm
17.5 mm
Adapter for slender shaft
(SDS-plus shank)
Drill bit (slender shaft)
Effective length
45 mm
Taper shank adapter
(SDS-plus shank)
Cotter
Taper mode
Morse taper (No. 1)
A-taper
B-taper
(110V, 115V, 120V, 127V, 220V, 230V, 240V)
420W*
0 – 1500/min
0 – 6000/min
3.4 – 18 mm
13 mm
24 mm
1.6 kg
Standard accessories are subject to change without notice.
Overall length
90 mm
Applicable drill bit
Drill bit (taper shank)
Taper shank adapter formed A-taper or B-taper
is provided as an optional accessory, but drill
bit for it is not provided.
English
11.0 ~ 17.5 mm
29