Setting The Clock/Timer - Toastmaster TCM8TD Use And Care Manual

Helpful Hints for Brewing
Always use fresh, cold water for brewing. In areas with hard water
or where water contains a high mineral content, use cold filtered
water for optimal coffee taste.
For best results, use a premium, fine grind, roast coffee.
Use a #4 paper cone filter or a permanent gold filter.

Setting the Clock/Timer

SETTING THE CLOCK
1. Plug the power cord into a wall outlet. The display will flash until
the time of day is set.
NOTE: A power failure will also cause the display to flash and it
will be necessary to reset the clock.
2. To set the clock, hold the HOUR button in for 3 to 5 seconds
until the hour setting begins to change. Press the HOUR button
until the correct hour is displayed, noting that PM is indicated on
the left of the display.
3. Press the MIN button until the correct
minutes are displayed. A few seconds
after you release the button, the colon
between the hour and the minutes will
begin to flash, indicating that the clock
is running.
SETTING THE TIMER
1. While holding the PROGRAM button down, press and hold the
HOUR button until the hour display begins to change. The coffee
cup icon on the left of the display will flash to indicate you are
programming the timer. Continue to press the HOUR button until
the correct hour is displayed for the brew time you would like to set,
noting that PM is indicated on the left of the display.
2. While holding down the PROGRAM button, press the MIN button
in the same way until the desired brew time is shown.
3. After the brew time is set, press PROGRAM again to return the
display to time of day.
4. Pressing the PROGRAM button toggles the timer on and off. The
coffee cup icon indicates when the timer is on.
8-Cup Thermal Carafe Coffee Maker with Digital Clock/Timer Use and Care Guide
8.