Step 3: Place The Circuit Board Onto The Base Plate; Step 4: Apply The Back Cover - TeAx Technology ThermalCapture 2.0 Mounting Instructions

Step 3: Place the circuit board onto the base plate

Place the base plate on a flat surface and place the circuit board on it. The rounded edges
should be facing away from you, such that the USB plug points to the left side.
Step 3a

Step 4: Apply the back cover

Cover the circuit board with the back cover and place the four included M1,6x16
countersunk screws into the screw holes.
Step 4a
Step 3b
Step 4b