Automatic Drive - BRC DPG1K User Manual

Favourite positions
The stars symbolise the favourite positions.
Drive the desk to the preferred position; press one of the circles with a star inside. A pop-up notification
will ask if the position should be saved as a favourite position, press "Yes, please" and the position is saved.
The circle will now show the height of the favourite position. By pressing and holding the button, the
application will take you to your favourite position.
Press the star to save Conform the choice Two saved positions Driving to a favorite position

Automatic drive

If "Automatic drive" is enabled in the "settings" menu, pressing the button once will make the application adjust
to the stored position without holding the button. Pressing any button or closing the app will interrupt the drive of
the desk. Please observe, by enabling automatic drive, the user accepts the responsibility and danger that can occur
under these circumstances.
Automatic drive is only possible to enable when the app is connected to a "full version" product.
The DPG will reflect the favourite positions saved through the app, so you can tilt between the positions via the
desk panel instead of using the app.
Page 39 of 56
BRC DPG CONTROLLER USER GUIDE