Product Description And Intended Use - Nice XBA7-XBA8 Instruction And Warnings For The Installer

contact with liquids of any type; do not drill or apply screws to the exterior; never place
the product near sources of heat or expose to naked flames. All these actions may
damage the product and cause malfunctions or hazardous situations. In these cases,
suspend installation immediately and contact the Nice Service Centre.
• Never make modifications to any part of the product. Operations other than as speci-
fied can only cause malfunctions. The manufacturer declines all liability for damage
caused by makeshift modifications to the product.
• Before connection to the power mains and before commissioning, the product must
be correctly installed.
• Packaging materials must be disposed off in accordance with local regulations.
1.3 - Use and maintenance instructions
• Periodically check the correct operation of the system.
• Do not use the product if it needs to be adjusted or repaired; only contact specialised
technical personnel to solve these problems. Make sure that the damaged systems
are deactivated or made unusable until they are repaired.
• Always make sure that the automation mechanism has been disconnected from the
power mains before performing any maintenance and/or cleaning operations.
2 – PRODUCT DESCRIPTION AND INTENDED USE
Indicator lights XBA7 and XBA8 are accessories for Nice SBAR, MBAR and LBAR barri-
ers. Any other use should be considered improper and forbidden! The manufac-
2 - English