Advertisement
CARVIN ENGINEERING DATA
INTRODUCTION
Congratulations on your purchase of the MACH
100 Stereo Guitar Pedal Power Amplifier. The
MACH 100 is designed for the modern guitarist
who wants a compact high output amplifier that
fits right on the pedal board. Use the stereo 2
channel amplifier to drive two guitar cabinets
with 16, 8 or 4 ohm impedance. The LINE IN jack
allows you to insert a backing track into your
performance. Using the PHONES output, you
can monitor the amplifier output using a 3.5mm
stereo cable. The LEVEL control allows the
user to adjust master volume of the amplifier.
The MUTE switch lets you instantly control the
output of the amplifiers with the press of the
switch. Step up to the next level of compact
amplification today.
»
PHONES:
3.5mm stereo output.
Volume is controlled by LEVEL.
»
OUTPUT (LEFT):
Left amplifier
output. 50W max output, 4Ω
minimum impedance.
»
LEVEL: Controls the master volume
of the amplifier.
»
MUTE: When engaged, switch mutes
the amplifier left and right outputs.
PHONES is not affected by the MUTE
switch.
»
OUTPUT (RIGHT):
Right amplifier
output. 50W max output, 4Ω
minimum impedance.
This CARVIN AUDIO product is guaranteed in normal use to be free from electrical and mechanical defects for a
period of one year from date of purchase. Retain proof of purchase. This warranty is in lieu of any and all other
guarantees or warranties, expressed or implied. There shall be no recovery for any consequential or incidental
damages.
2
PG.
»
Output Power (8
»
Minimum Impedance
»
Bridge Mode: No
»
Frequency Response: 20Hz - 20kHz (-3dB)
»
DC Power Requirements: 24VDC, 5000mA
»
Pedal Dimensions: 2.9"(73mm) W x 4.9"(125mm) L x 1.7"(44mm) H
»
Pedal Weight: 11.8oz.
»
Power Supply Dimensions: 2.7"(70mm) W x 6.6"(168mm) L x 1.6"(41mm) H
»
Power Supply Cable Length (supply to pedal): 44" (1117mm)
»
Power Supply AC Input: 100-240 50/60Hz
MACH 100 SPECIFICATIONS / FEATURES
PHONES
OUTPUT
(LEFT)
LEVEL
MACH 100
POWER AMPLIFIER
100 WATTS
OUTPUT
(RIGHT)
MUTE
WARRANTY
PANTONE COLOR GUIDE
carvinaudio.com
SILK
SPECIFICATIONS:
: 50W/CH
Ω)
4
:
Ω
24V
LINE IN
INPUT
»
24VDC:
(MONO)
5000mA supply.
»
LINE IN:
left signal is sent to the LEFT
OUTPUT and the right signal is sent
to the RIGHT OUTPUT. Both left and
right signals are sent to PHONES.
»
INPUT (MONO): Sends input
signal to the left and right
amplifier and PHONES
»
INPUT (Right): Sends input signal
to the right amplifier and
PHONES output
INPUT
(RIGHT)
Revision:
SILK
Revision By:
MACH100
Power supply input 24VDC
3.5mm stereo input. The
output.
.
11��� Carmel Mountain Rd.
Ste 1�0�-���
San Diego, CA ��1��
PART NO:
MACH
MACH100 2019-8-7
Date Revised:
Advertisement
