Upgrading The Wg511V2 Software - NETGEAR WG511v2 User Manual

NETGEAR 54 Mbps Wireless PC Card WG511v2 User Manual

Upgrading the WG511v2 Software

Upgrades may be available at the NETGEAR website. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR website Support page.
3. Remove the WG511v2 software from your laptop computer.
4. Remove the WG511v2 adapter from your laptop computer, and if prompted restart your laptop
computer.
5. Run the installer that you downloaded (the file ends in .exe).
6. Follow the installer instructions, and if prompted, then restart your laptop computer.
1-10 Basic Setup
v3.0, January 2007