Wag511 Leds; Removing The Wag511 Software; Upgrading The Wag511 Software - NETGEAR WAG511 - 802.11a/b/g Dual Band Wireless PC Card User Manual

NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 User Manual

WAG511 LEDs

The two LEDs on the NETGEAR Dual Band Wireless PC Card 32-bit CardBus WAG511 indicate
the condition of the wireless link.
LED 1 LED 2
Slow blink OFF
Alternate Alternate
blink blink
Slow blink Slow blink
Fast blink Fast blink
Off Off

Removing the WAG511 Software

If necessary, you can remove the wireless adapter software in these two ways:
• Navigate the Windows Start menu to the WAG511 Wireless PC Card program group, select
the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the WAG511 Wireless PC Card option, and follow the screen prompts.

Upgrading the WAG511 Software

Upgrades may be available at the NETGEAR website.
To install an upgrade:
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR website Support page.
3. Remove the WAG511 software from your computer.
4. Remove the WAG511 adapter from your laptop computer, and if prompted restart your
computer.
5. Run the installer that you downloaded (the file ends in .exe).
1-8
Meaning
Power save mode (default from power up or reset)
Looking for network association
Associated or joined with network; no activity
Associated or joined with network; blink rate increases with activity on the
network over the air or locally on the network
No power applied to the card
v4.0, March 2007