LW-805C
OPERATION
Assembly
•
Check that the control unit is disconnected from mains power
and the Temperature control is set to the 'Off' position.
The Power/Temperature indicator is the pointer for the
Temperature control.
•
Push the control unit fully into the socket on the end of the
pan with the control knob facing upwards.
•
Connect the power cable to a mains outlet.
Cooking oil
The pan surface is non-stick so only a little or no oil will be
required.
•
If you are using oil, pour the oil into the pan before starting
to cook.
•
If you are not using oil, wipe the surface of the pan with some
kitchen paper dampened with cooking oil.
Pre-heating the pan
Always pre-heat the pan before use.
•
Set the Temperature control to the heat setting you want to
use.
Set between 1 (minimum heat) and 5 (maximum heat).
The Power/Temperature indicator will switch off when the
pan reaches working temperature. Once the pan is heated,
the Power/Temperature indicator will switch on and off as the
thermostat maintains the temperature.
PAGE 7